Samsung Washer Leaking from Bottom: Here are 6 Fixes

Samsung washer leaks are among the most common calls received by plumbers and technicians in the US. If you face the same issue, this guide is for you. The most common causes behind Samsung washer leakage are clogged washer hoses and worn-out washing machine seals. Besides this, there are some other reasons also that cause Samsung washer leaks from the bottom.

Before fixing the issue, you need to identify the actual cause behind the leakage. This guide will provide you with information about the reasons for the washer’s leakage and their solutions. Here is a fixing guide for both front and top load washers leaking from the bottom.

Solutions for Samsung Washer that is Leaking from Bottom

1. Replace the Drain Pump

One of the leading causes of water leakage from the washer’s bottom is the faulty drain pump. A drain pump works to pump water out of the drain hose. If the washer’s drain pump is damaged, it will cause water leakage in the bottom. Besides this, if the bearings of the drain pump are worn out, then water will definitely leak from it.

The drain pump is present at the bottom panel of the washer, attached to the drain hose. Access the drain pump and inspect it keenly. If this is leaking, you will have to replace it. The drain pump is usually not repairable; that’s why you have to replace it with the help of a professional.

2. Tighten the Loose Drain Hose Clamp

The drain hose should be connected firmly to the drain pipe. The drain hose is responsible for removing dirty water from the washer. Thus, it should be intact and tightly attached to the drain pipe with a clamp. If the drain hose is correctly attached, it will ensure water drainage at the highest possible speed.

If you see water leakage from the bottom of the washer when it is in use, you have to check the drain hose connection. First, you should unplug the washer from the power source and also turn off the water supply. Then remove the drain hose from its connection. Tight the drain hose manually and make sure its clamp is not loose. Now, reattach the drain hose to the drain pump.

It’s easy to tighten the drain hose by your hand. If you find it challenging to tight or reattach the drain hose, you can call a plumber to do this for you.

drain hose clamp

3. Replace the Tub Seal

If your Samsung washer is likely to leak during the rinsing cycle, it could be due to the faulty tub seal. The purpose of the tub seal is to prevent the water from coming out of the transmission housing. If the seal is worn out, then water will pour out from the transmission housing. If this is the case, you have to replace the tub seal.

You can repair your tub seal to save money, but it is time-consuming. Moreover, it’s also frustrating sometimes if you don’t know exactly how to replace the tub seals. Therefore, getting professional help for this would be a good decision. It will cost you more but saves your time and energy as well.

4. Unclog the Catch Basket

Depending on your washer’s model, the catch basket could be present in two different places. Either it will be at the top edge of the cylindrical drum or at the top of the agitator. Its purpose is to catch the lint and hair that falls into the washer during the washing cycle. Over time, the buildup in this catch basket will cause poor drainage.

The water from the tub will not move down to the drain hose due to this blockage. Thus, it will cause the washer to leak eventually. Access the catch basket and unclog it to stop leakage from the bottom of the washer. A removable mesh screen will be present at the center of the washer’s tub and a metal basket. Remove the basket and mesh screen and rinse them with water to clean.

There is no catch basket in the recent models of Samsung washers. So, if you have a recently launched washer, then its leakage may not be due to the cloggy catch basket. Look for the other possible causes.

Is your Samsung dryer not heating properly? Click here to find out the possible causes and solutions!

5. Replace the Broken Coupler

The washer’s coupler is present on the motor to keep it safe. If the entire drive system seizes up, then the coupler on the motor breaks to save it from any damage. As a result, water will start leaking from the bottom of the washer.

The coupler doesn’t break at once. If you use your washer for a more extended period, the coupler will wear out gradually. If it happens, you have to replace the broken coupler with the new one. Replacing the coupler motor is not costly as the couplers are available at reasonable prices.

motor coupler

6. Replace the Leaky Door Seal

Water leaking from the bottom of the washer could have various reasons behind it. One of those reasons includes the leaky door seals. To ensure if the door seal is leaking, you have to inspect it. Access the door seal and check if it is tightly attached to the washer.

If you find the seal is leaking, it could be due to the loose screws holding the door. Or it could also be due to the loose seal between the door and the washer. If screws are loose, then you have to tighten them. But if the seal is leaking, you should replace the door seal.

Frequently Asked Questions

1. What could be the possible reasons for the washer leaking from the bottom?

The leading causes behind the washer leaking from the bottom include a loose drain hose, faulty drain pump, and worn-out tub-to-pump hose. The washer should be fixed immediately to avoid excessive leaking from its base.

2. Can overloading a Samsung washer causes it to leak?

Yes, overloading is one of the common causes of washing machine leakage. Unload it first if your washing machine is overfilled with the clothes and is leaking. Then run an empty cycle without detergents and clothes. If the washer is not leaking, then it means it was due to the overloading of the clothes.

3. Is it worth fixing a leaking Samsung washer?

If your Samsung washer is new, it will not break down regularly. Hence, it will be more affordable to repair it if it is leaking. Moreover, it is recommended to repair your washer if the repairing cost is less than 50% of the new washer’s price. But, if the repairing cost is more than 50% of the price of a new washer, you shouldn’t opt for it.

4. What is the average lifespan of a Samsung washer?

Usually, it is recommended to replace washing machines after eight years. But if you use your Samsung washer with care and maintenance, it may last up to 14 years or more.


  • Stephen Powers

    Appliance repair guy from Washington. I am majorly experienced in dishwashers, water filters and refrigerators, AMA on my twitter account.

Leave a Comment